Changing The Sensitivity According To The Movement Of The Subject Being Recorded - Panasonic Lumix DMC-LZ7 Operating Instructions Manual

Advanced (Recording pictures)
Changing the
sensitivity according
to the movement of the
subject being recorded
The camera detects the movement of the
subject near the center of the screen and
then sets the optimal ISO sensitivity and
shutter speed according to the movement
and the brightness of the subject.
1 Press [MENU/SET].
2 Press 3/4 to select [ISO LIMIT]
and then press 1.
REC
W.BALANCE
ISO
ISO LIMIT
MAX
ASPECT RATIO
PICT.SIZE
QUALITY
SELECT
3 Press 3/4 to select the item and
then press [MENU/SET].
Item
400 The ISO sensitivity
automatically increases
800
up to the set value
according to the
1250
movement and brightness
of the subject.
• The higher the value set for the ISO
sensitivity, the more effectively the jitter
will be reduced. However, picture noise
will increase.
44
VQT1C39
/
1
3
AWB
AUTO 400
400 800
1250 800
1250
MENU
SET
Settings
• Jitter is avoided when taking pictures
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster.
F2.8
1/125
• Noise is avoided when taking pictures
indoors of a subject with no movement by
decreasing the ISO sensitivity.
F2.8
1/30
• When you press the shutter button
halfway, [ ] A appears. When you
press the shutter button fully, the shutter
speed and the ISO sensitivity appear for a
while.
F2.8
• The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
50 cm (1.64 feet) (Tele) to ¶]
• When the flash is activated, the ISO
sensitivity is automatically increased to a
maximum of [ISO640]. (When the highest
ISO sensitivity is set to a setting other
than [ISO400].)
• Refer to P40 for information about
available flash range to take pictures.
ISO800
ISO200