Changing The Sensitivity According To The Movement Of The Subject Being Recorded - Panasonic Lumix DMC-FZ8 Operating Instructions Manual

Advanced (Recording pictures)
• The exposure and the white balance vary
depending on the burst mode setting.
When burst mode is set to [
fixed to the values set for the first picture.
When the burst speed is set to [
[ ], they are adjusted each time you
take a picture.
• If you are following a moving subject while
taking pictures in a place (landscape)
indoors, outdoors etc. where there is a
large difference between the light and
shade, it may take time until the exposure
is stable. If burst is used at this time, the
exposure may not become optimal.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
• Burst mode is not canceled when the
camera is switched off.
• When auto bracket and burst mode are
set simultaneously, auto bracket will be
performed.
• When burst mode is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When burst mode is activated,
[AUDIO REC.] cannot be used.
• You cannot take pictures in burst mode
when the quality is set to [RAW] or
[STARRY SKY] in scene mode is
selected.
52
VQT1B25
Changing the
sensitivity according
], they are
to the movement of the
] or
subject being recorded
The camera detects the movement of the
subject near the center of the screen and
then sets the optimal ISO sensitivity and
shutter speed according to the movement
and the brightness of the subject.
1 Press [MENU/SET].
2 Press 3/4 to select [ISO LIMIT]
and then press 1.
3 Press 3 4 to select the item and
then press [MENU/SET].
Item
400
800
1250
• The higher the value set for the ISO
sensitivity, the more effectively the jitter
will be reduced. However, picture noise
will increase.
/
1
REC
4
W.BALANCE AWB
WB ADJUST.
ISO
ISO LIMIT AUTO
400
MAX
400
ASPECT RATIO
800
800
PICT.SIZE 1250
1250
MENU
SELECT
SET
Settings
The ISO sensitivity
automatically increases up to
the set value according to the
movement and brightness of
the subject.