[Pet]; [High Sens.] - Panasonic Lumix DMC-LZ7 Operating Instructions Manual

Advanced (Recording pictures)
∫ Age display setting
• To have the age displayed, first set the
birthday and then be sure to set
[WITH AGE] before taking the pictures.
1
BABY1
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
CANCEL
∫ Birthday setting
1 Press 3/4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When the message appears, press 2/1
to select items (Year/Month/Day) and
then press 3/4 to set them.
3 Press [MENU/SET] to finish the setting.
• The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
50 cm (1.64 feet) (Tele) to ¶]
• The ISO sensitivity becomes the same as
when intelligent ISO sensitivity mode
[ ] is set to a highest ISO sensitivity of
[ISO400]. (P44)
• If you turn on the camera in [BABY1]/
[BABY2], the age and current date and
time are displayed for about 5 seconds on
the bottom of the screen.
• The age display style differs depending on
the language setting in the recording
mode.
• If the age is not properly displayed, check
the clock and birthday settings.
• If the camera is set to [WITHOUT AGE],
the age is not recorded even if the time
and birthday are set. This means the age
cannot be displayed even the camera is
set to [WITH AGE] after taking the
pictures.
• Use [RESET] in the [SETUP] menu to
reset the birthday setting. (P22).
• The following functions cannot be used.
– [SLOW SHUTTER]
– [D.ZOOM]
50
VQT1C39
MENU
SELECT SET

[PET]

MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P46)
Select this when you want to take pictures
of a pet such as a dog or a cat.
This allows you to set the birthday of your
pet. You can display the set age when
playing back the pictures and imprint the
age on the recorded pictures with [DATE
STAMP] (P76).
• The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for PC connection.)
Refer to [BABY1]/[BABY2] (P49) for
information about age display setting and
birthday setting.
• The initial setting for the AF assist lamp is
[OFF]. (P66)
• Refer to [BABY1]/[BABY2] for other
information about this mode.

[HIGH SENS.]

MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P46)
Select this mode for high-sensitivity
processing. You can take pictures at ISO
3200 sensitivity.
• The resolution of the recorded picture
decreases slightly because of high
sensitivity processing. This is not a
malfunction.
• The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
50 cm (1.64 feet) (Tele) to ¶]