Message Display - Panasonic Lumix DMC-LZ7 Operating Instructions Manual

Do not allow battery terminals to come
into contact with metal objects (such as
necklaces, hairpins, etc.).
• This can cause short circuiting or heat
generation and you may be badly burned
if you touch the batteries.
∫ Card
Do not leave the card where the
temperature is high, where
electromagnetic waves or static
electricity are easily generated or
exposed to direct sunlight.
Do not bend or drop the card.
• The card may be damaged or the recorded
content may be damaged or deleted.
• Put the card in the card case or the
storage bag after use and when storing or
carrying the card.
• Do not allow dirt, dust or water to get into
the terminals on the back of the card and
do not touch the terminals with your
fingers.
∫ When not using the camera for a long
period of time
• Store the batteries in a cool and dry place
with a relatively stable temperature.
[Recommended temperature:
15 oC to 25 oC (59 oF to 77 oF),
Recommended humidity: 40% to 60%]
• Always remove the batteries and the card
from the camera.
• If the batteries are left inserted in the
camera they will discharge as a weak
electric current passes through them even
if the camera is turned off. (Read P12 for
information about Ni-MH (nickel metal
hydride) batteries.)
• We recommend storing the camera with a
desiccant (silica gel) when you keep it in a
closet or a cabinet.

Message Display

Confirmation messages or error messages will
be displayed on the screen in some cases.
The major messages are described below
as examples.
[CURRENT BATTERY TYPE SETTING:
OXYRIDE]/[CURRENT BATTERY TYPE
SETTING: ALKALINE/Ni-MH]
This message is displayed the first time you
insert batteries and when the batteries are
exhausted and you replace them. If the
battery type being used is different from the
one indicated in the message, change the
battery type in [BATTERY TYPE] in the
[SETUP] menu. (P20)
[THIS MEMORY CARD IS LOCKED]
The Write-Protect switch on the SD
Memory Card and the SDHC Memory Card
are moved to [LOCK]. Move the switch
back to unlock it. (P16, 80, 84)
[NO VALID PICTURE TO PLAY]
Record a picture or insert a card with a
recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
Delete or overwrite the picture after
canceling the protect setting. (P80)
[THIS PICTURE CANNOT BE DELETED]/
[SOME PICTURES CANNOT BE
DELETED]
Pictures not based on the DCF standard
cannot be deleted. If you want to delete
some pictures, format the card after saving
necessary data on a PC etc. (P84)
[NO ADDITIONAL DELETE SELECTIONS
CAN BE MADE]
You have exceeded the number of pictures
that can be set at one time with [MULTI] in
[DATE STAMP] or [MULTI DELETE].
Delete the set pictures or imprint the date
information on them and then do the
operation again for any remaining pictures.
More than 999 favorites have been set.
Others
97
VQT1C39