Setting Date/Time (Clock Set); Changing The Clock Setting - Panasonic Lumix DMC-LZ7 Operating Instructions Manual

Setting Date/Time
(Clock Set)
∫ Initial setting
The clock is not set, so the following screen
appears when you turn the camera on.
PLEASE SET THE CLOCK
CLOCK SET
A: [MENU/SET] button
B: Cursor buttons
1 Press [MENU/SET].
2 Press 3/4/2/1 to select the
date and time.
CLOCK SET
00 00 :
SELECT
A: Time at the home area
B: Time at the travel destination (P57)
• 2/1: Select the desired item
• 3/4: Set the display order for the date
and time.
MENU
:
:
JAN 11 2007 . .
M/D/Y
CANCEL
MENU
SET EXIT
.
• : Cancel without setting the clock.
3 Press [MENU/SET] to set.
• Turn the camera off after setting the
clock. Then set the mode dial to a
recording mode to turn the camera on
and check whether or not the clock
setting is correct.

∫ Changing the clock setting

1 Press [MENU/SET].
2 Press 3/4 to select [CLOCK SET].
(P67)
3 Press 1 and then perform steps
3
to set the clock.
4 Press [MENU/SET] to close the menu.
• You can also set the clock in the
[SETUP] menu. (P20)
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately
3 months even if the batteries are
removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If the clock is not set, the correct date
cannot be printed when you stamp the
date on the pictures with [DATE STAMP]
(P76) or order a photo studio to print the
pictures. (P79)
Preparation
2
and
17
VQT1C39