Taking Pictures That Match The Scene Being Recorded (Scene Mode) - Panasonic Lumix DMC-LZ7 Operating Instructions Manual

Advanced (Recording pictures)
Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• Refer to P47 to 52 and "About the
information " for details about each
scene mode.
1 Press 1 for the [SCENE MODE]
menu.
2 Press 3/4/2/1 to select the
scene mode.
SCENE MODE
SCN
1
SELECT
SCENE MODE
SCN
SELECT
• Press 4 at A to switch to the next
menu screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
3 Press [MENU/SET] to set.
• The menu screen is switched to the
recording screen in the selected scene
mode.
46
VQT1C39
1 / 2
2
BABY1
MENU
DISPLAY
SET
2 / 2
STARRY SKY
MENU
SET
DISPLAY
• Press [MENU/SET] and then perform
1 2
steps , and
mode.
∫ About the information
• If you press [DISPLAY] when selecting a
scene mode in step
each scene mode are displayed. (If you
press [DISPLAY] again, the screen
returns to the [SCENE MODE] menu.)
e.g.: Displaying the
screen of [BABY1]
INFORMATION
BABY1
Suitable for taking pictures
of your baby.
Age can be displayed
with pictures if you set
the birthday.
CANCEL DISPLAY
• Refer to P41 for information about the
shutter speed.
• The flash setting is memorized even if the
camera is turned off. However, it returns to
the initial setting if the scene mode is
changed. (P39)
• When you take a picture with a scene
mode that is not adequate for the
purpose, the hue of the picture may differ
from the actual scene.
• If you press 2 when selecting
[PORTRAIT] or [STARRY SKY] in step
the [SCENE MODE] menu [
displayed. If you then select either the
[REC] menu [
[ ], you can set the desired items. (P19)
• The following cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [SENSITIVITY]
– [COL.MODE]
3
to change the scene
2
, explanations about
information
MENU
SET
] is
] or the [SETUP] menu
2
,