[Format]; Initializing The Built-In Memory Or A Card - Panasonic Lumix DMC-LZ7 Operating Instructions Manual

Advanced (Playback)

[FORMAT]

Initializing the built-in memory or a
card
MENU
Press [ ] to display the [PLAY] mode
SET
menu and select the item to set. (P72)
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
FORMAT
DELETE ALL DATA
ON THE BUILD-IN MEMORY?
SELECT
• When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the
card.
• If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use batteries with sufficient power (P23)
or the AC adaptor (DMW-AC6PP;
optional) when formatting.
• Do not turn the camera off during
formatting.
84
VQT1C39
YES
NO
MENU
SET
MENU
SET
• It may take longer to format the built-in
memory than the card. (Max. about
15 sec.)
• You cannot format an SD Memory Card or
an SDHC Memory Card when the card's
Write- Protect switch A is set to [LOCK].
• If the built-in memory or the card cannot
be formatted, consult your nearest service
center
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@us.panasonic.com
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
2