[Party]; [Candle Light]; [Sunset]; [Baby1]/[Baby2] - Panasonic Lumix DMC-LZ7 Operating Instructions Manual

[PARTY]

MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P46)
Select this when you want to take pictures
at a wedding reception, an indoor party etc.
This allows you to take pictures of people
and the background with near real-life
brightness.
∫ Technique for Party mode
• Use the flash.
• We recommend using a tripod and the
self-timer (P42) for taking pictures.
• We recommend rotating the zoom lever to
Wide (1k) and being about 1.5 m
(4.92 feet) from the subject when taking
pictures.
• The flash setting can be set to Slow sync./
Red-eye reduction [
Red-eye reduction [
• The white balance cannot be set.

[CANDLE LIGHT]

MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P46)
This mode allows you to take pictures with
a candle-lit atmosphere.
∫ Technique for Candle light mode
• If you make the most of the candle light,
you can take successful pictures without
using the flash.
• We recommend using a tripod and the
self-timer (P42) for taking pictures.
• The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
50 cm (1.64 feet) (Tele) to ¶]
• The flash setting can be set to Slow sync./
Red-eye reduction [
Red-eye reduction [
• The white balance cannot be set.
] or Forced ON/
].
] or Forced ON/
].

[SUNSET]

MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P46)
Select this when you want to take pictures
of sunset view. This allows you to take vivid
pictures of the red color of the sun.
• The flash setting is fixed to Forced OFF
[ ].
• The setting on the AF assist lamp is
disabled.
• ISO sensitivity is fixed to [ISO100].
• The white balance cannot be set.
1 [BABY1]/
[BABY2]
2
MENU
Press [ ] to display the [SCENE MODE]
SET
menu and select a scene mode. (P46)
This takes pictures of a baby with a healthy
complexion. When you use the flash, the
light from it is weaker than usual.
You can set two different birthdays by using
[BABY1] and [BABY2]. You can display the
set age when playing back the pictures and
stamp the age on the recorded pictures
with [DATE STAMP] (P76).
• The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for PC connection.)
Advanced (Recording pictures)
VQT1C39
49