Troubleshooting - Panasonic Lumix DMC-LC1GN Operating Instructions Manual

Panasonic digital camera operating instructions
Hide thumbs Also See for Lumix DMC-LC1GN:
Table of Contents

Advertisement

Troubleshooting

1:
The camera is not turned on.
1-1: Are the battery inserted or the AC
adaptor correctly connected?
Check the connection.
1-2: Is the battery sufficiently charged?
Use the battery that has been
sufficiently charged.
2:
As the camera is turned on, it
turns off immediately.
2:
Is the battery charge insufficient to
operate the camera?
Use the battery with charged one.
3:
The brightness of the screen
changes dark or bright for a
moment.
3:
This phenomenon appears when
pressing the shutter button
halfway to set the aperture value
and does not affect the recorded
pictures.
4:
The picture cannot be recorded.
4-1: Is the card inserted?
4-2: Is the operational mode dial
correctly set? Check it.
4-3: There is no memory capacity left
on the card. Before recording,
delete some pictures.
5:
The picture is not displayed on
the screen.
5:
Is the lens cap attached? Detach it
before turning on the camera in
recording mode.
6:
The screen is too bright or dark.
6:
Adjust the brightness of the
screen.
7:
The colour of the screen is
unusual.
7:
Colour around the subject with
high luminance may look different
Others
while you press the shutter button
halfway. This is not a malfunction.
This is caused by adjusting the
aperture value.
8:
Flash is not activated.
8:
Is the flash closed?
Press the [
open the flash.
9:
Unreadable language was
selected by mistake.
9:
Select [
menu to set the desired language.
10:
The indication of the aperture
value and the shutter speed are
not changed though we take
pictures with auto bracket.
10:
When the compensation range of
the exposure is reduced, the
indications are not changed.
However, the actual aperture
value and the shutter speed are
different from the indicated values.
11:
The subject is not focused
properly.
11-1: Is the subject out of the focus
range? (P36)
11-2: When you cannot focus on the
subject even if you tried many
times, once turn the camera off
and turn it on again.
12:
The picture is not played back.
12-1: Is the card inserted?
12-2: Is there a picture in the card?
12-3: Is the operational mode dial set to
playback [
121
OPEN] button to
] icon on the [SETUP]
]?

Advertisement

Table of Contents
loading

Table of Contents