Table of Contents
Advertisement
¬ Suggestions/Tips ¬
• Refer to P96 carefully when
connecting to the OS except for
Windows XP and Mac OS X with
setting [USB MODE] to [PTP].
• When connecting to a PC, we
recommend using the AC adaptor as
the power source.
• If the remaining battery power
becomes low during communication,
the power indicator blinks and the
alarm beeps. In this case, stop the
communication. Then turn the camera
off and charge the battery.
• When connecting to a PC, pictures
and sounds are not output from the
[AV OUT/REMOTE] socket.
• It may take time to display the
communication screen depending on
the PC.
• You can only load pictures from the
camera and cannot write them on the
card or delete them.
• Use the supplied USB connection
cable only.
• When there are 1000 or more pictures
on the card, the pictures may not be
imported.
• When the PC recovers from the
standby mode while connecting it to a
camera with USB connection cables,
they may not properly communicate
each other.
Playback (advanced)
99
Advertisement
Table of Contents
