Using The Ac Adaptor - Panasonic Lumix DMC-LC1GN Operating Instructions Manual

Using the AC Adaptor

You can use the camera without worrying about battery discharge by connecting to
an AC adaptor.
Preparation
• Check if the camera is turned off.
• Close the flash.
1
Connect the AC cable.
2
Slide the terminal door to open.
Preparation
3
Connect the DC cable.
¬ Suggestions/Tips ¬
• Use the supplied DC cable.
If you use other DC cables, it may
cause a malfunction.
• The camera becomes warm during
use. This is not a malfunction.
• Disconnect the AC adaptor and DC
cable when the camera is not in use.
• The battery cannot be charged in the
camera even if the AC adaptor is
connected.
13