Control Function Settings - Integra DSX-3 Instruction Manual

> Before Start > Part Names

Control Function Settings

You can enable the control functions between the unit and
external devices. Special devices or cable connections are
necessary to enable the functions. For more information
about installation, contact a store specializing in these
products.
IR jack
If you use a commercially available multiroom remote
control kit with this jack, you can operate the unit with the
remote controller even when you are in a separate room, or
operate the unit with the remote controller even if its remote
control sensor is difficult to see.
Connecting
block
This unit
Main room
Signal flow
0 Other companies may use indications other than IR on
their products. Confirm in the instruction manual included
with your components.
0 Refer to the instruction manual of the IR receiver for the
types of cables required for connection.
62
> Install
IR receiver
Remote
controller
Separate room
> Initial Setup > Playback
Advanced Setup | Firmware Update | Others