Using scan to e-mail operations
4
Press the keys on the 10-key pad to
enter the e-mail address, then press
the ) key, and then press the [Yes]
key. The e-mail address can also be
specified using one of the following
methods.
–
"Specifying the destination using one-touch dial keys" on
page 4-15.
–
"Specifying the destination using speed dial numbers" on
page 4-16.
–
"Specifying the destination using the phone book" on page 4-18.
–
To skip specifying the subject line, CC address, resolution, etc.,
press the [Start] key, instead of the [Yes] key.
E-mail addresses specified after the [Scan] key is pressed are set as
Scan to E-mail recipients.
5
Enter a title (subject), and then press
the [Yes] key.
6
Enter the e-mail address for any
additional recipient, and then press
the [Yes] key.
–
To specify more then one CC ad-
dress, press the [Yes] key to enter the additional addresses. Repeat
step 6 until all of the recipients have been specified.
7
After you have finished specifying the
addresses for additional recipients,
press the [Yes] key.
8
Press the * and ) keys to select the
resolution (150 × 150 dpi, 300 × 300
dpi, or 600 × 600 dpi), and then press
the [Yes] key.
–
To specify detailed settings for the scan mode, press the , key.
–
For information on specifying detailed settings, refer to "Changing
the scan mode settings" on page 4-9.
SU-502
4
4-7