Caller Id; Power Failure - Panasonic KX-TS730 Operating Instructions Manual

Caller ID

Problem
The unit does not display
the caller's name and/or
phone number.
The caller list/incoming
phone numbers are not
edited automatically.
I cannot dial the phone
number edited in the
caller list.
The display exits the
caller list while searching.

Power failure

Problem
The unit will not function.
For assistance, please visit http://www.panasonic.com/consumersupport
Cause & solution
L You have not subscribed to Caller ID service. Contact
your telephone service provider to subscribe.
L If your unit is connected to any additional telephone
equipment such as Caller ID box or wireless telephone
jack, disconnect the unit from the equipment and plug
the unit directly into the wall jack.
L If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the unit and the telephone line jack (page 6).
Contact your DSL provider for details.
L The name display service may not be available in some
areas. Contact your telephone service provider for
details.
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L The caller requested not to send caller information
(page 14).
L Generally caller information is displayed from the 2nd
ring.
L If the unit is connected to a PBX system, caller
information may not be received properly. Consult your
PBX supplier.
L The Caller ID number auto edit feature is turned off.
Turn it on and try again (page 20).
L You need to call back the edited number to activate
Caller ID number auto edit.
L The phone number you dialed might have an incorrect
edited pattern (for example, the long distance "1" or the
area code is missing). Edit the phone number with
another pattern (page 15).
L The unit automatically exits after 1 minute of inactivity.
Cause & solution
L This product is not designed to make calls in the event
of a power failure.
Useful Information
25