Preparation; Connections - Panasonic KX-TS730 Operating Instructions Manual

Preparation

Connections

1
2
Fasten the
interface cable.
Note:
L Use only provided Panasonic AC adaptor PQLV10 (9V/850 mA) for proper product
operation. In case of power outage, this product will not work.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
If you subscribe to an DSL service
L Please attach a noise filter (contact your DSL provider) to the telephone line between
the interface box and the telephone line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 14) do not
function properly.
6
For assistance, please visit http://www.panasonic.com/consumersupport
Interface cable
Fasten the
AC adaptor
cord.
Bottom of the
Hooks
interface box
To power outlet (120 V AC, 60 Hz)
AC adaptor
Telephone
line cord
Telephone line cord
Interface box
To disconnect the
interface cable, pull
out the cable while
pushing the tabs.
To single-line
telephone jack
(RJ11C)
To single-line
telephone jack
(RJ11C)
Noise filter
(For DSL users)