Table of Contents
Advertisement
Display messages
One of the following messages will be displayed in the condition described below.
Display message
Phonebook full
No items stored
Memory full
Troubleshooting
General use
Problem
The unit does not work.
I cannot hear a dial tone.
Programmable settings
Problem
I cannot program items.
While programming, the
unit starts to ring.
Making/answering calls
Problem
Noise is heard while
talking.
For assistance, please visit http://www.panasonic.com/consumersupport
Cause & solution
L There is no space to store new items in the phonebook.
Erase unnecessary items (page 13).
L Your phonebook, redial list or caller list is empty.
L Conversation recording memory is full. Erase
unnecessary items (page 22).
Cause & solution
L Check the connections (page 6).
L Unplug the unit's AC adaptor or Interface cable to reset
the unit. Reconnect the adaptor or interface cable and
try again.
L Confirm that the telephone line cord is connected
(page 6).
L Disconnect the unit from the telephone line and connect
a known working telephone. If the working telephone
operates properly, contact our service personnel to
have the unit repaired. If the working telephone does
not operate properly, contact your telephone company.
Cause & solution
L Do not pause for over 1 minute while programming.
L A call is being received. Answer the call and start again
from the beginning after a call is finished.
Cause & solution
L If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the unit and the telephone line jack (page 6).
Contact your DSL provider for details.
L If your unit is near noisy equipment such as computers
or fans, you may not be able to hear easily the other
party's voice. Turn off noisy equipment on both parties.
Useful Information
23
- Quick Links:
- Operating Instructions
- Connections
Hide quick links:
Advertisement
Table of Contents
