Caller Id Service; Using Caller Id Service - Panasonic KX-TG7621 Operating Instructions Manual

Using Caller ID service

Important:
R This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to a Caller ID service.
Contact your service provider/
telephone company for details.
Caller ID features
When an outside call is being received,
the caller's name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
R If the unit cannot receive caller
information, the following is displayed:
– "Out of area": The caller dials
from an area which does not
provide a Caller ID service.
– "Private caller": The caller
requests not to send caller
information.
– "Long distance": The caller
makes a long distance call.
R If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
Missed calls
Handset / Base unit
*1 KX-TG7641 series:page 4
If a call is not answered, the unit treats it
as a missed call. The display shows
"Missed call". This lets you know if
you should view the caller list to see who
called while you were away.
Note:
R Even when there are unviewed
missed calls,"Missed call"
disappears from the standby display if
For assistance, please visit http://www.panasonic.com/help
the following operation is performed
by one of the registered units:
– A handset is replaced on the base
unit or charger.
– Pressing MOFFN on a handset.
– Pressing MnN (EXIT) on the base
unit.
Phonebook name display
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Talking Caller ID
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Caller ID service of
your service provider/telephone
company.
– turn this feature on (page 44).
When caller information is received, the
handsets and base unit announce the
caller's name or phone number received
from your service provider/telephone
company following every ring.
The unit announces in English only.
R Name pronunciation may vary. This
feature may not pronounce all names
correctly.
R Caller ID service has a limit of how
many characters can be displayed. If
the caller's name is too long, the
*1
handset may not be able to display or
announce the entire name.
R The announcement is heard at the
same level as the ringer volume
(page 45, 46).
R If you turn on the answering system
and set the number of rings "2
rings" (page 65), the unit does not
announce the caller information from
the landline. If "Toll saver" is
selected and there is a new message,

Caller ID Service

53