B) On/Off Switch; C) Handle Release - Panasonic MC-UL426 Operating Instructions Manual

B) ON/OFF SWITCH

1 1

C) HANDLE RELEASE

Your vacuum cleaner is equipped with three
(3) position handle release;
• Upright position (locked)
• Middle position (normal use)
• Low position (under furniture)
NOTE: After use, unplug the mains lead
from the socket and store the vacuum
cleaner in the upright (vertical) position.
CAUTION
To prevent damaging carpeted floors,
tiled floors, linoleum, etc. Do not leave
the beater bar rotating in the same
place for too long.
1 2
MC-UL424:
Release the handle by
placing foot on the nozzle
and pulling back and
down on the handle with
your hand.
On/Off
Switch
MIDDLE POSITION (NORMAL USE)
MC-UL426:
Release the handle by
pressing down on the body
release pedal with your foot
and pulling back and down on
the handle with your hand.
To turn vacuum cleaner on or off, press on
the on/off switch.
CAUTION
To prevent damaging carpeted floors,
tiled floors, linoleum, etc. Do not
leave the beater bar rotating in the
same place for too long.
UPRIGHT POSITION
1 1
Move vacuum cleaner to upright position
for storage and tool use.
1 3
Move vacuum cleaner to
middle position for normal use.
- 13 -