Table of Contents
Advertisement
HOW TO OPERATE YOUR CLEANER
B) MAINS LEAD RELEASE
1) Turn the upper cord hook to
release the mains lead.
IMPORTANT: To avoid any possible damage to the mains lead,
never run over the cord or allow it to become
caught in the beater bar.
D) HANDLE LOCK / RELEASE BY FOOT PEDAL
To unlock the handle of the cleaner, step on the foot pedal. To return into the upright position, simply put the handle back.
1) Upright position
The handle should be in an upright
position when cleaning tools are
used.
CAUTION: To prevent damaging carpeted floors, tiled floors, Linoleum, etc.,
do not leave the beater bar rotating in the same place for too long.
E) AUTOMATIC HEIGHT ADJUSTMENT
Your Panasonic vacuum cleaner is designed with an
Automatic Height Adjustment, which adjusts the
cleaning head to the proper height of any carpet pile.
This system allows you to move from one carpeted area
to another, without having to make time consuming
manual adjustments.
2) Fix the mains lead into the
cord clip to help secure it
during use.
2) Middle position
For normal cleaning, depress the foot
pedal and pull back the handle to a
comfortable angle and release the
pedal to lower the cleaning head.
C) ON / OFF SWITCH
To start or stop the vacuum cleaner push the switch
button to " I " to turn ON and to " O " to turn OFF.
3) Low position
For cleaning under furniture,
depress the pedal a second time.
The handle may now be lowered
almost to the floor as shown.
5
Advertisement
Table of Contents
