To Operate Cleaner; Power Cord; On-Off Switch - Panasonic MC-V7626 Operating Instructions Manual

NOTE: To reduce the risk of electrical shock, this vacuum has a polarized plug, one
blade is wider than the other. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. DO NOT CHANGE THE PLUG IN
ANY WAY. Only use outlets near the floor.

TO OPERATE CLEANER

On-Off Switch

On-Off Switch
Interrupteur de marche/arrêt
Control On-Off

Power Cord

➢ ➢ Pull cord out of canister to desired
length.
➢ ➢ Snap cord into cord clip to prevent
accidental rewinding.
➢ ➢ Plug cord into 120-volt outlet located
near the floor.
TO REWIND:
➢ ➢ Remove the cord from the cord clip.
Unplug the cleaner.
➢ ➢ Hold the plug while rewinding to
prevent damage or injury from the
moving cord.
➢ ➢ Push cord rewind button.
➢ ➢ The cord will not rewind until the
cord rewind button is pushed.
➢ ➢ Press "On/Off" switch to start canister
and POWER NOZZLE.
- 20 -