Specifications; Troubleshooting - Panasonic MC-UL426 Operating Instructions Manual

Air Turbine:
PROBLEM
Will not run when
attached
Poor job of dirt
pick-up.

SPECIFICATIONS

MODEL NO.
POWER SOURCE
MAX. INPUT POWER
NOZZLE WIDTH
OVERLOAD PROTECTOR (NOZZLE)
MOTOR PROTECTION
BARE FLOOR CLEANING
TOOL STORAGE ON BOARD
AIR TURBINE
EXHAUST FILTER
DIMENSIONS (W x L x H)
NET WEIGHT
Note: Specifications are subject to change without notice.
POSSIBLE CAUSE
1. Carpet pile entangled around
agitator.
2. Worn or broken belt.
1. Carpet pile entangled around
beater bar.
2. Worn or broken belt.
3. Problem with vacuum cleaner.
4. Hole in vacuum hose.
POSSIBLE SOLUTION
1. Clean beater bar.
2. Not a serviceable item, return to
1. Clean beater bar.
2. Not a serviceable item, return to
3. Check vacuum cleaner
4. Replace hose - a serviceable item
MC-UL424
230-240V / 50Hz
1200w
34.5 cm
NO
YES
YES
YES
YES
HEPA Media
34.5 x 32 x 108 cm
6.8 kg
- 38 -
store or service center for
replacement if under warranty.
Panasonic service center for
replacement if under warranty.
troubleshooting tips.
at a Panasonic service center.
MC-UL426
230-240V / 50Hz
1400W
36.5 cm
YES
YES
YES
YES
YES
HEPA Media
36.5 x 38 x 108 cm
7.5 kg