Table of Contents
Advertisement
Quick Links
Specifications are subject to change without notice for further improvement.
MC-UL424-00
MC-UL426-00
Product Color: White (MC-UL424-00)
Black (MC-UL426-00)
Destination:
United Kingdom
© 2013 PANASONIC APPLICANCES COMPANY
OF AMERICA. All rights reserved. Unauthorized
copying and distribution is a violation of law.
Order Number MAC1301001CE
Vacuum Cleaner
Advertisement
Table of Contents
Related Manuals for Panasonic MC-UL424-00
Summary of Contents for Panasonic MC-UL424-00
-
Page 1: Vacuum Cleaner
Order Number MAC1301001CE Vacuum Cleaner MC-UL424-00 MC-UL426-00 Product Color: White (MC-UL424-00) Black (MC-UL426-00) Destination: United Kingdom Specifications are subject to change without notice for further improvement. © 2013 PANASONIC APPLICANCES COMPANY OF AMERICA. All rights reserved. Unauthorized copying and distribution is a violation of law. - Page 2 MC-UL424-00 / MC-UL426-00 1.2.3. Nozzle (MC-UL426 only)
-
Page 3: Packing Materials
MC-UL424-00 / MC-UL426-00 2.7. Packing Materials 2.7.1. Exploded View 2.7.2. Parts List (Packing Material) Ref. No Part No. Part Name & Description Quantity Remarks AC61ZDSCZ0E0 Carton Box MC-UL424 AC61ZDVMZ0E0 Carton Box MC-UL426 AC01ZDVJZ0E0 Operating Instructions... -
Page 4: Service Procedures - Body
MC-UL424-00 / MC-UL426-00 3 SERVICE PROCEDURES - BODY 3.1. Motor 3.1.1. Removal 1. Remove nozzle hose from body by (1) pressing in locking tab and (2) sliding up and out of retaining slot. 2. Remove two (2) screws from rear of vacuum cleaner. -
Page 5: Power Cord
11. Disconnect lead wires from motor. 12. Remove noise suppressor. 13. Remove motor support rubbers. 14. MC-UL424-00 only: Remove two (2) screws and motor flange. Lay aside. 4. Remove cord through hole in dust container and discard. 3.2.2. -
Page 6: On/Off Switch
MC-UL424-00 / MC-UL426-00 3.3. On/Off Switch 3.3.1. Removal 1. Remove lower plate (See Lower Plate - Removal). 2. Remove agitator and belt (See Agitator - Removal). 3. Remove motor cover (See Motor - Removal). 4. Remove nozzle (See Motor - Removal). -
Page 7: Lower Plate
MC-UL424-00 / MC-UL426-00 4 SERVICE PROCEDURES - NOZZLE (MC-UL424) 4.1. Lower Plate 4.1.2. Installation 4.1.1. Removal 1. Place the vacuum cleaner in the upright position standing on the handle. This will minimize wheel interference when 1. Turn off and unplug vacuum cleaner. - Page 8 MC-UL424-00 / MC-UL426-00 should be reassembled and checked for dielectric 4.2. Agitator breakdown or current leakage. 4.2.1. Removal 1. Remove lower plate (See Lower Plate - Removal). 2. Lay vacuum cleaner with bottom facing upwards and nozzle flat 3. Remove agitator carefully lifting out.
-
Page 9: Nozzle Cover
MC-UL424-00 / MC-UL426-00 5 SERVICE PROCEDURES - NOZZLE (MC-UL426) 5.1. Nozzle cover 5.1.1. Removal 1. Release the nozzle cover by rotating the nozzle cover retainers to the UNLOCK position. 2. Rotate upward on the nozzle cover to remove it from the nozzle base. - Page 10 MC-UL424-00 / MC-UL426-00 5.3. Belt 5.3.1. Removal 1. Remove nozzle cover (see NOZZLE COVER REMOVAL). 2. Remove agitator (see AGITATOR REMOVAL). 3. Remove the broken or worn belt and replace with new belt. 5.3.2. Installation 1. Place new belt around the motor shaft.
-
Page 11: Nozzle Motor
MC-UL424-00 / MC-UL426-00 6. Remove nozzle motor from lower body. 5.4. Nozzle Motor 5.4.1. Removal 1. Remove nozzle cover (see NOZZLE COVER REMOVAL). 7. Remove PCB unit and disconnect black lead wire and red lead wire. 8. Discard motor. 2. Remove agitator (see AGITATOR REMOVAL). -
Page 12: Overload Protector
MC-UL424-00 / MC-UL426-00 4. Reinstall motor cap and secure with four (4) screws. 5.6. 5. Reinstall PCB. 5.6.1. Removal 6. Route wires according to WIRE MANAGEMENT drawing. 7. Reinstall nozzle housing. Care should be taken not to pinch 1. Remove...