TG7100-7102-7103NE(e-da).book Page 8 Wednesday, April 19, 2006 1:09 PM
Preparation
Base unit
A
C
A Charge contact
B {x} (Page)
C Ringer
Displays
Display icons
Display
Meaning
icon
Within range of a base unit
w
L When flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
Handset is accessing base
L
unit. (intercom, paging,
changing base unit settings,
etc.)
Handset is on an outside call.
k
Battery strength
5
Handset number (Standby
[2]
display setting, side 15)
New voice mail message
0
received (side 19) (for Danish
and Swedish users only)
Line is being used by another
handset.
8
Connections
B
Base unit
When connecting the AC adaptor to the base
unit, a short beep will be heard. If it is not heard,
check the connections.
Charger (KX-TG7102 and KX-TG7103 only)
Connect the AC adaptor to the charger and route
the cable as shown. The charger can be mounted
on the wall, if required.
Screws
Bemærk:
L When connecting the telephone line cord to the
telephone network, use the included telephone
(220–240 V, 50 Hz)
To telephone
network
Use only the included AC
adaptor and telephone line
cord.
Hooks
25 mm
Use only the included AC adaptor.
Hook
(220 – 240 V,
50 Hz)