Base Unit Settings - Panasonic KX-TG7103NE Operating Instructions Manual

TG7100-7102-7103NE(e-da).book Page 16 Wednesday, April 19, 2006 1:09 PM

Base Unit Settings

Base unit settings
L Use the handset to customise the base unit.
L When customising the base unit, the current item or setting is indicated by >.
To customise the base unit:
1
{j/OK}
2
Press {^} or {V} to select "Indstil base". i {>}
3
Press {^} or {V} to select the desired item in the base unit settings menu. i {>}
4
Press {^} or {V} to select the desired item in the sub-menu. i {>}
5
Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the "Feature"
column of the chart.
L To exit the operation, press {ih}.
Base unit settings
menu
Ringestyrke
Opkaldsvalg
Andre valg
*1 Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If
you forget your PIN, consult your nearest Panasonic service centre.
16
Sub-menu Feature (default setting)
— Base unit ringer volume (Medium)
Change the recall time ("100 msek.").
Genkald
side 17
Nr.-spærring
Change base unit PIN ("0000").
Base-PIN
– Enter the current 4-digit base unit PIN.
i Enter the new 4-digit base unit PIN.
i {j/OK}
("FRA"): side 21
Repeater funk.
*1
*2