Handset Settings - Panasonic KX-TG7103NE Operating Instructions Manual

TG7100-7102-7103NE(e-da).book Page 15 Wednesday, April 19, 2006 1:09 PM

Handset settings

L When customising the handset, the current item or setting is indicated by >.
To customise the handset:
1
{j/OK}
2
Press {^} or {V} to select "Indstil håndsæt". i {>}
3
Press {^} or {V} to select the desired item in the handset settings menu. i {>}
4
Press {^} or {V} to select the desired item in the sub-menu. i {>}
5
Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the "Feature"
column of the chart.
L To exit the operation, press {ih}.
Handset settings Sub-menu
menu
Sæt dato/tid
Indstil lyd Ringestyrke
Ekst. ringetone
Int. ringetone
Indstil display Standby display
Vælg sprog
Kontrast
Registrering Reg.Håndsæt
Andre valg Tastetoner
Auto svar
*1 When the ringer is turned off, the handset will ring:
– at the minimum level for intercom calls
– at the maximum level for paging
*2 If you select one of the melody ringtones, the ringtone will continue to sound for several seconds
if the caller hangs up before you answer. You may hear a dial tone or no one on the line when you
answer a call.
The preset melodies in this product are used with permission of © 2004 M-ZoNE Co., Ltd.
*3 The preset melodies in this product are used with permission of © 2004 M-ZoNE Co., Ltd.
*4 If "FRA" is selected, only current date and time are displayed.
If "Håndsæt nummer" is selected and the current handset number is 2, "[2]" is displayed.
*5 Auto talk feature allows you to answer calls simply by lifting the handset off the base unit or
charger. You do not need to press {C}.
Feature (default setting)
— Date and time: side 11
Handset ringer volume (Maximum)
Ringtones for outside calls ("Ringetone
Ringtones for intercom calls
("Ringetone
Standby mode display ("FRA")
Display language ("English"): side 10
Display contrast (Level 3)
side 20
Keytones on/off ("TIL")
Auto talk on/off ("FRA")
Handset Settings
*1
*3
3")
*4
*5
*2
1")
15