Table of Contents
Advertisement
TG7100-7102-7103NE(e-da).book Page 26 Wednesday, April 19, 2006 1:09 PM
Useful Information
Problem
Caller information is not displayed.
While viewing caller information, the
display returns to standby mode.
I cannot register a handset to the base
unit.
26
Cause & solution
L You must subscribe to Caller ID service.
L Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact your
DSL service provider) to the telephone line between the
base unit and the telephone line jack (for Norway and
Sweden only).
L Do not pause for over 1 minute while searching.
L The maximum number of handsets (6) are already
registered to the base unit. Cancel unused handset
registrations from the base unit (side 20).
L You entered the wrong PIN number. If you forget your
PIN, consult your nearest Panasonic service centre.
L Place the handset and the base unit away from other
electrical appliances.
Advertisement
Table of Contents
