Remote Code - Panasonic KX-TG5471 Operating Instructions Manual

Remote Operation from a Touch Tone Phone

Remote Code

The remote code prevents unauthorized people from accessing your unit and
listening to your messages. Choose any 2-digit number (00–99) for your remote
code.
The factory preset remote code is "11". If you do not program your own remote
code, you can use "11".
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [ ], then press the soft key (
3
Press the soft key (
answering".
4
Scroll to "Remote code" by pressing [d] or
[ ], then press the soft key (
5
Enter a 2-digit remote code (00–99).
6
Press the soft key (
• If the handset beeps 3 times, the entered remote code is the same as the
password (p. 57) and cannot be used. Start again from step 5 and select
another code.
7
Press [OFF].
To confirm the remote code, repeat steps 1 to 4.
• The remote code is displayed. When finished, press [OFF].
66
Handset
SELECT
) at "Set
SELECT
).
SELECT
).
SAVE
Initial setting
).
Set answering
Remote code
Ex. Entered 35.
Remote code
:35