Intercom; Making Intercom Calls - Panasonic KX-TG5471 Operating Instructions Manual

Intercom

Intercom calls can be made between the handset and the base unit.

Making Intercom Calls

From
Handset
1
Press [HOLD/INTERCOM].
• The paged unit will ring for 1 minute.
• To stop paging, press [OFF].
2
When the paged party answers, start talking.
• You can switch to the speaker by pressing [s].
To switch back to the receiver, press [C].
3
To disconnect the intercom, press [OFF].
From
Base Unit
Using this feature, you can also locate a misplaced handset.
1
Press [LOCATOR/INTERCOM/TRANSFER].
• The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.
• The handset will ring for 1 minute.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM/
TRANSFER].
2
When the paged party answers, talk into the MIC.
3
To disconnect the intercom, press [SP-PHONE] or [LOCATOR/
INTERCOM/TRANSFER].
• The indicator lights go out.
During an intercom call:
• If you have difficulty hearing while using the speakerphone on the handset or
base unit, decrease the speaker volume by pressing [d].
• If an incoming call is being received, you will hear two tones (incoming call
tone, p. 53) and the IN USE indicator on the base unit will flash rapidly.
To answer the call;
— if using the handset, press [OFF], then press [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
For assistance, please call: 1-800-211-PANA(7262)
Calling Base
Intercom
00-00-05
45