Raymarine E SERIES Installation Instructions Manual page 48

Digital radar cables
You will need a dedicated radar power and data
digital cable and appropriate network cables to
connect your scanner to your system.
Connection
Radar scanner to power
supply and Raymarine
network switch.
Raymarine network switch to
multifunction display.
SeaTalk hs Radar power and data digital
cables
These cables contain the wires for a scanner's power
and data connections.
Cable
RJ45 SeaTalk hs 5 m (16.4 ft)
Power and data digital cable
RJ45 SeaTalk hs 10 m (32.8 ft)
Power and data digital cable
RJ45 SeaTalk hs 15 m (49.2 ft)
Power and data digital cable
RJ45 SeaTalk hs 25 m (82.0 ft)
Power and data digital cable
Note: The maximum length for the radar power
and data digital cable (including any extensions)
is 25 m (82 ft).
RayNet Radar power and data digital cables
These cables contain the wires for a scanner's power
and data connections.
Cable
RayNet 5 m (16.4 ft) Power
and data digital cable
RayNet 10 m (32.8 ft) Power
and data digital cable
RayNet 15 m (49.2 ft) Power
and data digital cable
RayNet 25 m (82.0 ft) Power
and data digital cable
Note: The maximum length for the radar power
and data digital cable (including any extensions)
is 25 m (82 ft).
48
Required cable
Power and data digital
cable. For longer cable runs,
extensions are available in a
variety of lengths.
Network cables, available in
a variety of cable lengths.
Part number
A55076D
A55077D
A55078D
A55079D
Part number
A80227
A80228
A80229
A80230
Radar power and data digital extension
cables
These cables extend the power and data digital
cables for a scanner's power and data connections.
Cable
2.5 m (8.2 ft) Power and data
digital cable
5 m (16.4 ft) Power and data
digital cable
10 m (32.8 ft) Power and data
digital cable
Note: The maximum length for the radar power
and data digital cable (including any extensions)
is 25 m (82 ft).
a Series / c Series / e Series installation instructions
Part number
A92141D
A55080D
A55081D