Raymarine E SERIES Installation Instructions Manual page 19

Item Device Type
3 Vessel tank sensors
— third-party
4 GNSS Receiver
(external) —
Raymarine ®
5 Instruments —
Raymarine ®
6 Pilot control heads —
Raymarine ®
7 Autopilots —
®
Raymarine
Planning the installation
Maximum quantity Suitable Devices
• Up to 5 x fuel. Third-party NMEA 2000 interfaces
• 1 x fresh water.
• 1 x waste water.
• 1 x sewage.
• 1 x bait / fish.
1 Any combination of the following:
• RS130 GPS
• Raystar125 GPS
• Raystar125+GPS (via optional
SeaTalk to SeaTalk
converter)
As determined by SeaTalk
SeaTalk ng® bus
• i50 Depth, Speed, or Tridata
bandwidth and power
loading.
• i60 Wind, CH Wind
• i70
• ST70+
• ST70
SeaTalk (via optional SeaTalk to
SeaTalk
• i40 Wind, Speed, Depth, or
Bidata
• ST60+ Wind, Speed, Depth,
Rudder, or Compass
• ST40 Wind, Speed, Depth,
Rudder, or Compass
As determined
SeaTalk
by SeaTalk or
• p70
SeaTalk ng® bus
bandwidth and
• p70R
power loading, as
• ST70 (SeaTalk
appropriate.
computer only.)
• ST70+ (SeaTalk
computer only.)
SeaTalk (via optional SeaTalk to
SeaTalk
• ST6002
• ST7002
• ST8002
1
SeaTalk
• Evolution autopilots
• All SPX course computers
SeaTalk (via optional SeaTalk to
SeaTalk
• ST1000
• ST2000
• S1000
• S1
ng®
ng® :
ng® converter):
ng® :
ng® course
ng® course
ng® converter):
ng® :
ng® converter):
Connections
NMEA 2000 (via optional
DeviceNet adaptor cables)
SeaTalk, SeaTalk ng® , or NMEA
0183
SeaTalk, SeaTalk ng®
SeaTalk, SeaTalk ng®
SeaTalk, SeaTalk ng® , or NMEA
0183
19