Voice Enhancer Technology; Clarity Booster - Panasonic KX-TG5050C Operating Instructions Manual

5.8 ghz digital cordless phone
Table of Contents

Advertisement

TG5050CE.fm.fm Page 21 Thursday, June 24, 2004 3:55 PM

Voice Enhancer Technology

Panasonic's Voice Enhancer Technology clarifies the voice of the person you are
talking to, reproducing a more natural-sounding voice that is easier to hear and
understand.
Voice Enhancer Technology can be turned on or off. The factory preset is OFF.
• Depending on the condition and quality of your telephone line, this feature may
intensify existing line noise. If it becomes difficult to hear, turn this feature off.
To turn this feature on, press the soft key (
during a conversation.
• "
" is displayed.
VE
• To turn this feature off, press the soft key (
again. "
" disappears from the display.
VE
• After hanging up a call, the on/off setting will be retained.
When the handset is not in use, you can also turn this feature on or off by
programming as follows:
1. Press [MENU].
2. Scroll to "Voice enhancer" by pressing [d] or [B], then press the soft key
(
).
SELECT
3. Select "On" or "Off" by pressing [d] or [B].
4. Press the soft key (

Clarity Booster

This feature can improve sound clarity when the handset is used in an area where
there may be interference. During an outside call, this feature will be turned on
automatically when necessary. This feature will turn off when you hang up or put a
call on hold. It will not turn off automatically during a call. You can also turn this
feature on or off manually.
1. Press [MENU] during an outside call.
2. Press [2] to select "2=Booster on" or
"2=Booster off".
• You can also select "2=Booster on" or "2=Booster off
then pressing the soft key (
• While this feature is turned on, "Booster on" will flash during a conversation.
• If this feature is turned off manually during a call, it will not be turned on
automatically during the same call.
• When this feature is turned on automatically or manually, battery operating time
may be shortened (p. 11).
Backlit LCD display/Lighted handset keypad
The handset display and dialing buttons will light for a few seconds after pressing a
button or lifting the handset off the base unit. They will also light when a call is being
received.
), then press [OFF].
SAVE
).
SELECT
Making Calls
)
( V E )
SPIPRIVACY1
IN USE
Talk
00-00-32
( V E )
)
( V E )
PRIVACY
1=Phone book
2=Booster on
"
by pressing [d]
[1]
MUTE
21

Advertisement

Table of Contents
loading

Table of Contents