Sony CCP-8000 System Setup Manual page 81

Setting items
Tally Gp
SBus Tally Enable
1 1 1
For the system 1 1
Select "Gp1-4" or "Gp5-8" as desired from the Tally Group for the system 1. As to the S-Bus Tally,
select "Disable" (i.e., the "SBus Tally Enable" button is not selected) because there is no equipment that
is connected by S-Bus.
For the system 2 2 2 2 2
This setting is not required for the system 2 because the system 2 does not use tally. Select either
"Gp1-4" or "Gp5-8" from the Tally Group for the system 2. As to the S-Bus Tally, select "Disable"
because UMD is not connected to the system 2.
For the system 3 3 3 3 3
Select "Gp1-4" or "Gp5-8" as desired from the Tally Group for the system 3. As to the S-Bus Tally,
select "Enable" (i.e., select the "SBus Tally Enable" button) if there is any equipment (such as UMD) that
is connected by S-Bus.
MVS-8000 System
SYSTEM SETUP
1 1
System 1 1 1 System 2
Gp1-4/Gp5-8 Gp1-4/Gp5-8
Disable Disable
2 2 3 3
2 2 System 3 3 3
Gp1-4/Gp5-8
Enable/Disable
3-7. Tally Setup
3-25