Ccp-8000 Panel Cabling - Sony CCP-8000 System Setup Manual

2-8. CCP-8000 Panel Cabling

CCP-8000 panel modules connections are shown in figure.
CCP-8000 system control cabling
Extension Adaptor MKS-8075
SCU OUT
SCU IN
(Max.10 m)
SCU OUT
SCU IN
(Max.10 m)
Menu Panel
MKS-8011
(*1) : There are three methods as described below to install the memory card/USB module MKS-8025.
. In order to install the memory card/USB adaptor MKS-8025 into the main panel, connect the DEVICE terminal of the
MKS-8010 to the HOST terminal of the main panel.
. In order to install the memory card/USB adaptor MKS-8025 into the AUX panel, connect the DEVICE terminal of the
MKS-8010 to the HOST terminal of the AUX panel.
. In order to install the memory card/USB adaptor MKS-8025 outside the system using the MKS-8076, connect the
DEVICE terminal of the MKS-8010 to the HOST terminal of the MKS-8076.
Supplied and required cables
Cable Description
EXT/MENU/MAIN D-sub 50-pin cable (5/10 m)
PANEL cable
USB cable USB Type A
* : Quantity depends on the configuration.
MVS-8000 System
SYSTEM SETUP
IN
Reference video signal
(Max.10 m)
EXT PANEL 2
System Control Unit
MKS-8010
SCU
(Max.5 m)
Quantity
*
1
Main panel
HOST
SCU
(Max.5 m)
(Max.5 m)
DEVICE
MAIN PANEL
MENU PANEL DEVICE
(Max.5 m)
Part No.
Supplied with CCP-8000
SWC-5005/SWC-5010
Supplied with CCP-8000
2-8. CCP-8000 Panel Cabling
AUX panel
HOST SCU
EXT PANEL3
(Max.10 m)
(*1)
AC 100 to 240 V
HOST
Memory Card/USB Adaptor
MKS-8076
2-19