Mvs-8000 System Video Cabling - Sony CCP-8000 System Setup Manual

2-6. MVS-8000 System Video Cabling

The MVS-8000 system connections is shown in the illustration.
Different video and control wiring configurations may be created to meet individual facility requirements.
Each input can be assigned to any CCP panel source select button, and any MVS system video signal can
be assigned to any pair of output connectors.
MVS-8000 system video cabling
SWITCHER B
PRIMARY INPUTS
1 to 68
Camera
8
VTR
Routing Switcher
PRIMARY INPUTS
69 to 80
MONITOR OUTPUTS
1 to 8
MONITOR
(*1) : For the AC power cord, refer to "Optional Items" of the "DME Processor Pack MVE-8000" Operation Manual.
(*2) : For the AC power cord, refer to "Optional Items" of the "Multi-Format Switcher Processor MVS-8000"
Operation Manual.
(*3) : Terminate the system with the 75 Z terminator supplied with this unit.
Supplied and required cables
Cable Description
DME V/K Interface MDR 68-pin Female
MVS-8000 System
SYSTEM SETUP
DME Processor Pack
MVE-8000
Reference video
AC100 to 240 V Power Supply (*1)
signal (*3)
Reference video signal (*3)
DME 1B
Switcher Processor Pack
MVS-8400/8300/8200
75-pin Cable
Quantity
2
2-6. MVS-8000 system video Cabling
SWITCHER A
DME 1A
AC100 to 240 V Power Supply (*2)
AC100 to 240 V Power Supply (*2)
MONITOR
OUTPUTS 1 to 48
8
VTR
AC100 to 240 V Power Supply (*2)
AC100 to 240 V Power Supply (*2)
Video Signal Input
8
Video Signal Output
5 Video/Key Signal
AC Power Supply
Part No.
Supplied with MVE-8000
2-15