Sony CCP-8000 System Setup Manual page 12

1-3. System Description
Power supply unit
The MVS-8000 Power Supply Units are supplied with MVS-8000 processor.
Three power supply units are required to run the MVS-8000 system. An optional fourth unit is added to
provide redundant power. With fourth unit mounted, one unit can fail without causing system failure.
It is recommended that each unit's AC input be connected to the AC supply circuit of a separated power
source system. Any unit (s) for which a separate power source system is not available, is (are) recom-
mended to be connected to a UPS (Uninterruptible Power Supply).
Option
Option name
HK-PSU04
The power cord is not supplied with the MVS-8000.
It is necessary that the power cord should be applicable to places in the area.
Power cord
Area Specification
Japan 125 V 10 A
*3P - 2P (adaptor)
USA/Canada 125 V 10 A
All Europian countries 250 V 10 A
1-8
Description
Power Supply Unit
Length
2.5 m
2.4 m
2.4 m
Part No.
1-776-997-11
*1-750-686-11
1-557-377-11
1-782-929-21
MVS-8000 System
SYSTEM SETUP