Panasonic KX-TVP50 Getting Started page 10

P r o c e d u re – P art 2 (th in g s th e S y s te m M a n a ge r s h o u ld d o )
For each COS number in use, adjust parameters as needed.
3.
To change parameters, go to the Main Menu of System Manager's Service:
(a) press 6 other features;
(b) press 2 to set Class of Service;
(c) dial the COS number (1 through 62);
(d) as each parameter is played, you can change it or accept it; these are the guidances
Personal greeting length is (time)
New message retention time is (day)
Saved message retention time is (day)
Message length is (time)
Maximum number of messages per mailbox is
(number)
Total message time available per mailbox is
(time)
Message retrieval order is
Message scanning with information is
Play system prompt after personal greeting
Use call waiting on busy signal
Message cancel for live call screening
Direct mailbox access
Intercom paging group number is (number)
Prompt mode is
Maximum number of caller IDs for caller name
announce is (number)
Personal greeting for caller ID
Caller ID screen
Message notification
External message delivery
Auto forwarding
CAUTION
• The default value for New Message Retention Time is 14 days.
If some subscribers cannot check their mailboxes within this time, their COS setting
should be changed (maximum 30 days).
10
Procedure – Part 2 (things the System Manager should do)
that you will hear:
Parameter
Default
Range
(COS 1)
16 s
8 - 6 0 s ( s t e p s o f 4 s )
14 days 1-30 days
5 days 1 - 3 0 d a y s / u n li m it e d
3 min
10
10 min 5-100 min
LIFO LIFO/ FIFO
disabled enabled/disabled
disabled enabled/disabled
disabled enabled/disabled
enabled enabled/disabled
enabled enabled/disabled
1
user 1 system/user1/user2
30
enabled enabled/disabled
enabled enabled/disabled
disabled enabled/disabled
disabled enabled/disabled
disabled enabled/disabled
1-6 min
5-100
1-9
0-30