Please ensure the batteries are inserted as shown. Close the cover as indicated by the arrow. • When you replace the batteries, Digital Cordless Phone KX-TCD410NL Model No. until the handset is fully LIN E part should be inserted first.
QG_410NL_e.fm Page 2 Thursday, March 20, 2003 6:35 PM Location of Controls Handset Receiver Display Charge Contact Microphone Base Unit LI N E Handset Display Within range of a base unit Out of range/No registration /No power on base unit Paging or using the handset Making or answering calls Phonebook Mode...
QG_410NL_e.fm Page 3 Thursday, March 20, 2003 6:35 PM Your Guide to the Display Note: The LCD display of the handset can display up to 14 segments and each character will be displayed as shown in the following table. The LCD descriptions listed below are displays that do not show the correct letter form or are abbreviated descriptions.
Page 4
QG_410NL_e.fm Page 4 Thursday, March 20, 2003 6:35 PM Set-up Menu for Handset The followings are handset setting menu structure. To search the desired item, press UP or DOWN. To select the desired item, press RIGHT. After the selection for one of the items in the 3rd menu, please follow as directed on particular page.
Page 5
QG_410NL_e.fm Page 5 Thursday, March 20, 2003 6:35 PM Operations Function Power On/Off Making a call Answering a call Hang up Key Lock On/Off Dialling the last number dialled Dialling with the Redial List Storing a caller information Dialling with Phonebook Receiver volume Calling Back Action...
QG_410NL_e.fm Page 6 Thursday, March 20, 2003 6:35 PM Symbols Used in This Operating Instructions Symbol To search the desired item, press UP or DOWN. To select the desired item, press RIGHT. To search and then to select the desired item, press UP or DOWN then RIGHT.
Before Requesting Help ... 35 Technical Information ... 37 Guarantee ... 38 Index... 39 Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 7 hours before initial use. Digital Cordless Phone Operating Instructions KX-TCD410NL Model No.
Thank you for purchasing your new Panasonic digital cordless telephone. Dear purchaser, You have acquired a KX-TCD410NL, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission.
TCD410NL_E.book Page 3 Thursday, March 20, 2003 5:55 PM Only use the power supply included with the product. Do not connect the AC Adaptor to any AC outlet other than the standard AC230V. The apparatus is approved for use with PQLV19CE power supply.
TCD410NL_E.book Page 4 Thursday, March 20, 2003 5:55 PM Setting up Connection Plug in the AC adaptor and the telephone line cord in order Hook Fasten the AC adaptor cord to prevent it from being disconnected. The AC adaptor must remain connected at all times (It is normal for the adaptor to feel warm during use).
TCD410NL_E.book Page 5 Thursday, March 20, 2003 5:55 PM Battery Charge At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 7 hours before initial use. During charging, the battery icon is as shown below.
• Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and start charging, it may cause the leakage of the battery electrolyte. Please use only Panasonic P03P(Ni-MH) or P03H(Ni-Cd) batteries. Meaning Search/Select Search/Select "OTHER OPT".
Page 13
TCD410NL_E.book Page 7 Thursday, March 20, 2003 5:55 PM Location of Controls Handset Receiver Display Charge Contact Microphone Base unit LI N E Handset Display Within range of a base unit Out of range/No registration /No power on base unit Paging or using the handset Making or answering calls Phonebook Mode...
TCD410NL_E.book Page 8 Thursday, March 20, 2003 5:55 PM Setting up Wall Mounting This unit can be mounted on a wall. - Insert screws into the wall. The centre of the screw hole should be 8 cm horizontally apart. - Connect the AC adaptor and the telephone line cord. - Arrange the wires as shown, then mount the unit.
TCD410NL_E.book Page 9 Thursday, March 20, 2003 5:55 PM Power On/Off Power on Press for more than 1 second.*1 *1 When button is released, the display changes to the standby mode. *2 The display goes blank. Making a Call Pre-dialling Phone Number Press TALK.
TCD410NL_E.book Page 10 Thursday, March 20, 2003 5:55 PM Making Calls Redialling The last 10 numbers dialled are stored in the redial list automatically. Dialling with the Redial List Search the desired Press REDIAL.*1 dialled item. Editing the Dialled Number in the Redial List Press REDIAL.*1 Search/Select the desired dialled item.
TCD410NL_E.book Page 11 Thursday, March 20, 2003 5:55 PM Caller ID Service Caller ID is a service of your Network provider and will only operate if you have subscribed to this feature. After subscribing to Caller ID, this phone will display the caller information. If your unit is connected to a PBX or a telephone line that does not support this service, you will not be able to use it.
TCD410NL_E.book Page 12 Thursday, March 20, 2003 5:55 PM Caller ID Caller ID List Information up to 50 different callers is stored from the most recent call to the oldest call in the caller list. When the 51st call is received, the oldest caller information is cleared. If you receive a call from the same phone number you stored with a name in the phonebook, the display will show the caller’s name.
TCD410NL_E.book Page 13 Thursday, March 20, 2003 5:55 PM Auto Talk If you set Auto Talk to on, you can answer the phone by lifting the handset off the base unit. Press Search/Select MENU. "SETTING HS". • To exit the operation, press Temporary Bell Off When an external call is incoming, you can temporarily turn off the handset ringer.
TCD410NL_E.book Page 14 Thursday, March 20, 2003 5:55 PM Phonebook You can store up to 20 caller information in the phonebook. If you received a call from the same phone number you stored with a name in the phonebook, the display will show the caller’s name.
Page 21
TCD410NL_E.book Page 15 Thursday, March 20, 2003 5:55 PM Editing a Caller Information Press Search/Select PHONEBOOK.*1 desired item. <Phone Number> Press CLEAR.*2 Move cursor. <Name> Move cursor. Press CLEAR.*2 Clearing a Caller Information Press Search/Select desired item. PHONEBOOK.*1 Dialling with the Phonebook Press Search PHONEBOOK.*1...
TCD410NL_E.book Page 16 Thursday, March 20, 2003 5:55 PM Phonebook Storing the Phone Number into the Phonebook When Pre-dialling Phone Number Press OK to store the number. Press OK. • To exit the operation, press *1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers. *2 To enter characters, see Character Selection on page 14.
TCD410NL_E.book Page 17 Thursday, March 20, 2003 5:55 PM Hot Key You can assign the dialling buttons 1 through 9 as hot keys. You can choose 9 phone numbers from the phonebook. Registering a Phone Number as a Hot Key Press Search/Select PHONEBOOK.*1...
TCD410NL_E.book Page 18 Thursday, March 20, 2003 5:55 PM Handset Settings : Time Alarm Before programming, please follow steps 1 to 3. You must set the clock before setting the time alarm. Press MENU. Search/Select "SETTING HS". Setting Alarm Time Time Search/Select Enter time.
TCD410NL_E.book Page 20 Thursday, March 20, 2003 5:55 PM Handset Settings : Tone Option You can set the following sounds on or off. Key Tone: Key tone will sound when you press any key, and a confirmation tone and an error tone will be heard during operation. Call Waiting Tone: Call waiting tone will sound when an incoming external call is received during an intercom call.
TCD410NL_E.book Page 21 Thursday, March 20, 2003 5:55 PM Before programming, please follow steps 1 to 3. Press MENU. Search/Select "SETTING HS". Selecting the Talk Mode Display Even if you select "PHONE NO", the other party’s phone number will not appear on your display when you receive calls without subscribing to a Caller ID service.
Changing Handset PIN The factory preset is 0000. Once you have programmed the handset PIN, you cannot confirm it. We recommend you write down the handset PIN. If you forget it, please consult your nearest Panasonic Service Centre. 070-3314500 Press MENU. Search/Select "SETTING HS".
TCD410NL_E.book Page 23 Thursday, March 20, 2003 5:55 PM Key Lock You can lock the handset dialling buttons. Only incoming calls are accepted while the key lock is on. The key lock is cancelled if the handset is turned off. When the key lock is on, emergency calls cannot be made until key lock is cancelled.
The factory preset is 0000. Once you have programmed the base unit PIN, you cannot confirm it. We recommend you write down the base unit PIN. If you forget it, please consult your nearest Panasonic Service Centre. 070-3314500 Current 4-digit Base Unit PIN...
TCD410NL_E.book Page 25 Thursday, March 20, 2003 5:55 PM Before programming, please follow steps 1 to 2. Press MENU. Search/Select "SETTING BS". Cancelling Call Restricted Number 4-digit Base Unit PIN <to continue> Repeat the Press RIGHT. steps 5 to 7. Select Flash Timing You can change the duration of the flash timing depending on the requirements of your network provider or PBX.
TCD410NL_E.book Page 26 Thursday, March 20, 2003 5:55 PM Base Unit Settings Before programming, please follow steps 1 to 2. Press MENU. Search/Select "SETTING BS". Automatic Route Selection Automatic Route Selection is a feature which selects the least expensive carrier (network) service available, when making long distance calls.
TCD410NL_E.book Page 27 Thursday, March 20, 2003 5:55 PM Before programming, please follow steps 1 to 2. Press MENU. Search/Select "SETTING BS". International Carrier Services Automatic Route Selection (ARS) is also used for international calls. After subscribing to a second international carrier service, store the second international carrier code.
TCD410NL_E.book Page 28 Thursday, March 20, 2003 5:55 PM Initial Settings : Reset Handset You can reset all of the handset settings to their initial settings. Press MENU. Search/Select "SETTING HS". Search/Select "YES" or "NO". • To exit the operation, press *1 The factory preset is 0000.
TCD410NL_E.book Page 29 Thursday, March 20, 2003 5:55 PM Reset Base Unit Settings If the base unit is reset, the Caller ID list will clear. Press MENU. Search/Select "SETTING BS". 4-digit Base Unit PIN • To exit the operation, press *1 The factory preset is 0000.
*1 The factory preset is 0000. KX-A142EX Handset: You can see the illustrations for answering system feature on additional KX-A142EX handset body, but KX-TCD410NL does not have an answering system feature. Therefore, the answering system does not work even if KX-A142EX handset been registered to KX-TCD410NL.
TCD410NL_E.book Page 31 Thursday, March 20, 2003 5:55 PM Cancelling a Base Unit You can cancel any base unit that your handset is registered to. Search/Select Press MENU. "SETTING HS". 4-digit Handset PIN Search/Select desired base unit number to cancel.*2 Cancelling a Handset Each handset can cancel itself or another handset.
Page 38
TCD410NL_E.book Page 32 Thursday, March 20, 2003 5:55 PM Multi-unit User Operation Before programming, please follow steps 1 to 4. Press Search/Select MENU. "SETTING BS". Ringer Mode Selection; Setting the All Handsets Mode "All handsets" mode. Setting the Selected Handsets Mode Handset Numbers "Selected handsets"...
TCD410NL_E.book Page 33 Thursday, March 20, 2003 5:55 PM : Base Unit Selection When Automatic Base Unit Access is selected, if you move outside of the radio range of the current base unit the handset automatically searches for other registered bases. When a specified base unit is selected, the handset will access that base unit only.
TCD410NL_E.book Page 34 Thursday, March 20, 2003 5:55 PM Intercom Intercom between Handsets You can use your handsets as a 2-way intercom. For example, when Handset 1 calls Handset 2. To hang up, press <Handset 1> on the display) Press INTERCOM. •...
TCD410NL_E.book Page 35 Thursday, March 20, 2003 5:55 PM If you experience any problems with the normal use of your apparatus, you should unplug it from the telephone outlet and connect a known working telephone in its place. If the known working telephone still has problems, then please contact the customer service department of your Network provider.
Page 42
Wrong PIN number entered • If PIN number is lost, (Default 0000). contact the Panasonic Service Centre. • Electrical noise in local Move base/handset away area. from sources of electrical noise (e.g TV, radio).
TCD410NL_E.book Page 37 Thursday, March 20, 2003 5:55 PM Specifications: Standard: Number of channels: Frequency range: Duplex procedure: Channel spacing: Bit rate: Modulation: RF Transmission Power: Voice coding: Power source: Power consumption, base unit: Operating conditions: Dimensions, Base Unit: Dimensions, Handset: •...
9. De software updates van de professionele non-lineaire videomontage systemen vallen buiten deze garantiebepalingen. Voor reparatie van apparatuur in Nederland,dient de apparatuur franco verzonden te worden aan: PANASONIC-CENTRE NEDERLAND (Servicom b.v.), Zonweg 60,2516 BM DEN HAAG tel.:070 -3314500,fax.:070 -3477185 Dealerstempel Type no.
TCD410NL_E.book Page 39 Thursday, March 20, 2003 5:55 PM AC Adaptor ... 2, 4 Accessories... 2 Answering Calls ... 13 Auto Talk ... 13 Automatic Route Selection Area Code(s)/Country Code ... 26 International Carrier Services ... 27 On/Off ... 27 Base Unit Initial Settings...
Page 46
TCD410NL_E.book Page 40 Thursday, March 20, 2003 5:55 PM Hereby, Panasonic Communications Co., Ltd., declares that this Dect Cordless Telephone is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the manufacturer's declaration of conformity to the essential requirements of the R&TTE Directive is available at the following...
Page 47
NOTE Please note the following in the Operating Instructions. Page Original Storing the Area Code(s)/ Country Code (KX-TCD410NL) Store the area code(s) for which the chosen carrier (network) service charge rates are lower than the (KX-TCD400NL) original carrier (network) service.