Maintenance; Firmware Upgrade - D-Link DAS-3626 User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Maintenance

Firmware Upgrade

Configuration File Backup & Restore
Firmware Upgrade
This screen is used to upgrade firmware from the Commander switch to the Member switch. Member switches will be
listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name
and Version. To specify a certain switch for firmware download, click its corresponding check box under the Port
heading. To update the firmware, enter the Server IP Address where the firmware resides and enter the
Path/Filename of the firmware. Click Download to initiate the file transfer.
To view this window, click Maintenance > Firmware Upgrade as shown below:
Configuration File Backup/Restore
This screen is used to upgrade configuration files from the Commander switch to the Member switch using a TFTP
server. Member switches will be listed in the table and will be specified by ID, Port (port on the CS where the MS
resides), MAC Address, Model Name and Firmware Version. To update the configuration file, enter the Server IP
Address where the file resides and enter the Path/Filename of the configuration file. Click Restore to initiate the file
transfer from a TFTP server to the switch. Click Backup to backup the configuration file to a TFTP server.
To view this window, click Maintenance > Configuration File Backup/Restore as shown below:
Figure 183. Firmware Upgrade menu
Figure 184. Configuration File Backup/Restore menu
Section 13
154