Operation - Flymo sabrecut xt Operating Instructions Manual

4
5
5
7
9

5. Operation

Working positions:
6
5871192-01_9672988-01.indd 6
1. Depress both locking buttons
from the battery holder
2. Plug the plug of the charger cable
3. Plug battery charger
6
Charging indicator lamp
Battery is being charged.
Charging indicator lamp
Battery is fully charged.
(For charging time, see 9. Technical Data.)
4. First remove the charging cable
and then unplug the battery charger
5. Slide battery
audibly engages.
Avoid exhaustive discharge:
Avoid exhaustive discharge: Do not wait until the blade comes
to an absolute stop (batterytotally discharged) as this shortens
the battery life.
v If the output of the hedge trimmer decreases
noticeably,charge the battery.
If the battery has been totally discharged, the LED
at thestart of charging. If the LED
a faulthas occurred (see 8. Troubleshooting).
8
The hedge trimmer can be operated in 4 working positions
(illustration similar).
Side trimming:
Telescopic pipe
retracted
and remove the battery
4
on the handle.
6
into the battery
7
into a mains socket.
8
at the charger unit is lit red:
9
at the charger unit is lit green:
9
from the charging socket
7
8
onto the battery holder
5
is still flashing after an hour,
9
Vertical trimming Horizontal trimming
at high level: at high level:
Telescopic tube Motor unit tilted
extended by 75°, telescopic
pipe extended
5
.
5
5
from the mains socket.
on the handle until it
6
will flash
9
Trimming at low
level:
Motor unit tilted
by – 60°, telescopic
pipe extended
12.06.14 10:08