Table of Contents
Advertisement
3. OPERATION
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the trimmer line to stop and remove the battery
before you adjust or transport the product.
To charge the battery [ Fig. O1 / O2 / O3 ]:
CAUTION!
v Note the mains voltage! The voltage of the power source must
match the voltage specified on the rating plate of the charger.
For the FLYMO Battery Trimmer Art. 9705445-xx there is no battery
and no charger in the scope of delivery.
Thanks to the intelligent charging process, the charge condition of the
battery is automatically detected and then charged up with the optimal
charge current depending on battery temperature and voltage.
In this way, the battery is treated with care and remains permanently fully
charged when it is stored in the charger.
(A)
1. Push the locking button
holder
(D)
.
2. Connect the battery charger
3. Slide the battery charger
(C)
When the battery charge indicator
the battery is being charged.
When the battery charge indicator
permanently green the battery is completely charged
(Charging time, see 7. TECHNICAL DATA).
4. Examine the charge status regularly while you charge.
(B)
5. When the battery
is completely charged, you can disconnect the
battery
(B)
from the charger
Meaning of the Indication Elements:
Indication on the charger [ Fig. O3 ]:
Flashing of the Battery
The charging procedure is indicated by flashing of the battery charge
Charge Indicator
(Lc)
(Lc)
indicator
Note: The charging procedure is only possible when the battery
temperature is within the allowable charging temperature range,
see 7. TECHNICAL DATA.
Continuous Lighting
Continuous lighting of the battery charge indicator
of the Battery
the battery is fully charged or that the temperature of the battery is
(Lc)
Charge Indicator
not within the allowable charging temperature range and can therefore
not be charged.
When the battery is not inserted, continuous lighting of the battery
charge indicator
socket outlet and that the battery charger is ready for operation.
Battery charge status indication
After starting the product, the battery charge status indication
is displayed for 5 seconds.
Battery charge status
67 – 100 % charged
34 – 66 % charged
11 – 33 % charged
0 – 10 % charged
(L1)
If the LED
flashes green, the battery must be charged.
If the error LED
(Wp)
is illuminated or flashing, see 6. TROUBLESHOOTING.
To set the working position:
Working position 1 [Fig. O5 ]:
For standard trimming.
Working position 2 [Fig. O6 / O7 ]:
Trimming beneath obstacles.
The tube can be lowered from standard position 1 to two lowered
positions 2 or 3 for trimming beneath obstacles.
1. Put the trimmer on the floor.
2. Hold the trimmer by both handles
3. Push the foot pedal
(16)
with a foot and lower the tube
position.
4. Release the foot pedal
(16)
6
42260-85.960.01.indd 6
42260-85.960.01.indd 6
(B)
and remove the battery
from the battery
(C)
into a mains socket.
onto the battery
(B)
.
(Lc)
at the charger flashes green
(Lc)
at the charger illuminates
(C)
.
.
(Lc)
indicates that
(Lc)
indicates that the mains plug is inserted in the
(P)
on the product [ Fig. O4 / O14 ]:
Battery charge status indication
(L1)
,
(L2)
and
(L3)
illuminate green
(L1)
(L2)
and
illuminate green
(L1)
illuminates green
(L1)
flashes green
(1)
(6)
/
.
(2)
to the required
and let the tube
(2)
engage again.
Working position 3 [Fig. O8 / O9 / O10 ]:
Cutting at lawn edges.
CAUTION!
The trimmer may only be used when the trimmer head
locked at 0° or 90°.
To rotate the trimmer head
standard position 1.
1. Turn the plant guard into the park position (lateral).
2. Hold the trimmer by the tube
(17)
the unlock button
with one finger.
3. Push the unlock button
90° until it audibly engages.
4. Release the unlock button
5. Place the trimmer head
the trimmer line
(13)
cuts on the path. (The wheel
on the path.)
To adjust the tube length [ Fig. O11 ]:
DANGER!
The product must not be used when the tube is completely
inserted (transport position).
1. Loosen the clamping sleeve
2. Pull out the tube
(2)
to the required length.
3. Tighten the clamping sleeve again
To adjust the position of the additional handle [ Fig. O12 ]:
The position of the additional handle can be adjusted to your body height.
1. Pull the lock
(5)
belonging to the additional handle
2. Tilt the additional handle
(5)
3. Release the lock
again.
If the trimmer is correctly set to the body height, the posture is upright
and the trimmer head in working position 1 is tilted slightly forwards.
v Hold the trimmer by the main handle
such a manner that the trimmer head is tilted forwards slightly.
To adjust the plant guard [ Fig. O13 ]:
(14)
The plant guard
allows the trimming of grass close to plants and trees
without damaging them with the trimmer line.
v Work position W: Turn the plant guard
engages.
v Park position P (lateral): Turn the plant guard
audibly engages.
(P)
To start the trimmer [ Fig. O1 /O14 ]:
DANGER! Risk of injury!
Risk of injury if the product does not stop when you
release the start lever.
v Do not bypass the safety devices or switches. For example
do not attach the start lever to the handle.
The product is provided with a two-switch safety device (start lever
with starting lockout) to prevent the product from being turned on
by accident.
To start:
(B)
1. Put the battery
into the battery holder
2. Hold the additional handle
3. Hold the main handle
(1)
lockout
(15)
forward and pull the start lever
The trimmer starts and the battery charge status indication
played for 5 seconds.
4. Release the starting lockout
CAUTION!
v Avoid contact of the trimmer line with hard objects (walls,
stones, fences etc.) to prevent the trimmer line from wearing
or breaking.
(9)
to 90°, the tube must be in
(2)
with both hands so that you can push
(17)
(9)
and rotate the trimmer head
from 0° to
(17)
and let the tube
(2)
engage again.
(9)
with the wheel
(10)
on the lawn edge so that
(10)
must not stand
(3)
(padlock symbol open).
(3)
(padlock symbol closed).
(6)
.
(6)
to the desired position.
(1)
and additional handle
(14)
anticlockwise, until it audibly
(14)
clockwise, until it
(D)
until it audibly engages.
(6)
with one hand.
with the other hand, push the starting
(16)
.
(15)
again.
(9)
is
(6)
in
(P)
is dis-
12.10.21 11:36
12.10.21 11:36
Advertisement
Table of Contents
