Latch - Forward Facing Installation With Lower Anchor And Top Tether - Baby Trend CV88A Owner's Manual

Hide thumbs Also See for CV88A:
Table of Contents

Advertisement

5.0 Installation and Use
5.7 LATCH - Forward Facing Installation with Lower Anchor and
Top Tether
NOTE: Use the vehicle's seat belt (not LATCH) for
children weighing more than 45 lbs (20.5 kg).
Requirements. See Section 2.3:
Weight is 23 - 45 lbs (10.43 - 20.4 kg)
Height is 50 inches (127 cm) or less.
Age is 1 year old.
1. Place this restraint in a rear seating position
designated as lower anchor compatible. Refer to
your vehicle owner's manual for LATCH locations.
2. Ensure vehicle is level and that the Convertible is
placed flat, and rests on the front outer edge of the
vehicle seat. Make sure the harness is adjusted to
position 5 or 4. Only use recline positions 5 and 4 in
forward facing positions.
3. Lift back flap and place harness to side.
31
Top Tether
LATCH
lower anchor
Rear of Vehicle
Copyright © 2016, Baby Trend, Inc.
5.0 Installation and Use
4. Route LATCH belt through the front facing
safety belt path (Fig. 32a) leaving the
adjuster side of the LATCH belt on the
child's RIGHT side (Fig. 32b).
NOTE: Remove any twist in webbing to
ensure the webbing lies flat for securing
the restraint to the vehicle.
5. Put weight in the seat with your hand to
compress the vehicle seat cushion then
attach the LATCH connector to the vehicle's
LATCH anchor and pull adjuster belt tight
as possible (Fig. 32c). Pull up on LATCH
connector as to ensure the LATCH is secure.
Copyright © 2016, Baby Trend, Inc.
Fig. 32a
Fig. 32b
Fig. 32c
32

Advertisement

Table of Contents
loading

Table of Contents