Messages - Panasonic SDR-S15 Operating Instructions Manual

3

Messages

Others
Message
Writing on the SD card failed.
CANNOT RECORD.
Neither motion pictures nor still pictures are recorded
on the SD card.
Data is recorded on the SD card, but if this message
NO DATA.
appears, the card may be unstable.
Turn the unit off and turn back on.
THIS CARD CANNOT
An 8 MB or 16 MB SD card cannot be used in video
RECORD IN VIDEO
recording mode.
MODE.
The SD card is not supported or cannot be recognised
CHECK CARD.
by the unit.
CARD LOCKED. The SD card is write-protected. (P.13)
CARD FULL.
The SD card cannot be recorded on because it is full
SCENE NUMBER IS
or the numbers of scenes or numbers of scenes for
FULL.
the date has reached the maximum. Either delete
CANNOT RECORD. unnecessary scenes or insert a new card. (P.56)
THE NUMBER OF
PROGRAM IS FULL.
Close the card/battery door.
CARD DOOR OPENED.
● Use a Panasonic SD card or other SD card
applicable for motion picture recording. (P.12)
● If this message appears when an applicable
ERROR OCCURRED.
RECORDING IS card is used, it is recommended to format the
STOPPED. card. Formatting deletes all data on the SD card.
Therefore, save data on a computer or other device
before formatting the card.
EXIT THE MENU THEN
CHANGE TO MANUAL
Functions that cannot be used simultaneously were
MODE.
selected. (P.97)
CANCEL NIGHT VIEW
MODE.
90
LSQT1438
What to check
This section explains the main messages appearing on the LCD monitor and
how to deal with them.
Message
You tried connecting the unit to a computer without
PLEASE CONNECT AC
ADAPTOR connecting the AC adaptor.
ERROR OCCURRED.
The unit detected an error. Eject the SD card and turn
PLEASE TURN UNIT OFF,
off the unit and turn back on.
THEN TURN ON AGAIN.
The unit is not properly connected to a computer or
DISCONNECT USB
printer.
CABLE.
Disconnect and reconnect the USB cable.
CANNOT OPERATE
The unit cannot be turned off while it is connected to
WHILE USB
a computer.
CONNECTED.
CARD ERROR HAS
OCCURRED.
The data on the SD card contains errors.
TO REPAIR THE
To repair the data, either use a battery of sufficient life
CARD, PLEASE
or connect the AC adaptor. Depending on the error, it
CONNECT AC
may take time to repair the data.
ADAPTOR OR
CHANGE BATTERY.
The data has been repaired.
● Depending on the situation, the data may not be
completely repaired.
NOW REPAIRING
● If the unit is turned off without repairing data, data can
DATA.
be repaired the next time that the unit is turned on.
DO NOT REMOVE
● If repairing fails, the data cannot be played back.
CARD.
Format the SD card with this unit.
● Do not repair SD cards recorded on other devices
on this unit.
CANNOT CHECK
CONNECTED DEVICE.
A device that cannot be used with this unit is
DISCONNECT THE
connected to the unit.
USB CABLE FROM
THIS UNIT.
● Before recording, open the lens cover.
● This message may appear if you try to record in an
extremely dark place
CONDITION TOO
● After the unit is turned on, the message is displayed
DARK, OR OPEN
LENS COVER. when the initial recording mode is established,
but it is not displayed when manual recording is
performed.
What to check
91
LSQT1438