3
Printing pictures from
With other
PictBridge printers
products
Connect the unit and AC adaptor (P.14), and set the mode dial to a setting
other than [OFF].
Connect the unit and printer using the USB cable (supplied).
Insert the plugs as far as they will go.
Select [PictBridge].
Select the still pictures to print.
Set the number of copies.
•
•
Number of
copies (Max. 9)
●
Do not use any other USB connecting cables except the supplied one.
(Operation is not guaranteed with any other USB cables.)
●
Connect the unit directly to the printer without going through a USB hub.
●
For paper size and print quality, etc., check printer settings.
●
Avoid the following operations during printing. Otherwise, pictures will not print
correctly:
•
Disconnecting the USB cable
•
Opening the card/battery door
•
Rotating the mode dial
•
Turning off the unit
62
LSQT1438
To not print the picture, set "0".
Repeat steps
and
to select up to 8 still
pictures for printing.
Still pictures recorded with this unit can be printed by connecting the unit
directly to a printer that supports PictBridge.
Display the PictBridge menu.
Make print settings.
Print settings
Item
DATE PRINT
OFF/ON
PAPER SIZE
STANDARD: Prioritize printer setting.
4×5 INCH:
5×7 INCH:
4×6 INCH:
A4:
PAGE LAYOUT
STANDARD: Prioritize printer setting.
[
[
●
Settings not supported by the printer cannot be selected.
[PRINT]→[YES]
When printing is complete, disconnect the USB
cable (supplied) and exit [PictBridge].
To cancel printing
A confirmation message appears.
[YES]: Cancels print settings and returns to step
[NO]: Saves print settings made in steps
●
Still pictures recorded with other devices may not be printed.
●
DPOF settings (P.59) cannot be used while this unit is directly connected to a
PictBridge printer.
Available settings
L size
2L size
Postcard size
A4 size
]:
No frame print
]:
Frame print
.
-
and returns to step
LSQT1438
.
63