Recording In Web Mode; Using The Video Light; Recording For Posting Videos On Youtube (Web Mode); Brightening Up Dark Scenes For Recording - Panasonic SDR-S15 Operating Instructions Manual

Sd video camera
Hide thumbs Also See for SDR-S15:
Table of Contents

Advertisement

6

Recording in WEB mode/

Recording
indicates functions used with motion pictures and
still pictures.

Recording for posting videos on YouTube (WEB mode)

You can record video clips in the right file sizes for uploading to the YouTube
video sharing website.
To cancel WEB mode
WEB mode is canceled when the
unit is turned off.
In WEB mode, the remaining recordable time is
Remaining recordable time
displayed instead of the elapsed recording time.
The remaining recordable time is counted down on
the display from "9m59s" (the maximum length of
the video clips that can be uploaded to YouTube)
when recording starts.
The remaining recordable time appears in red
when it falls below 1 minute.
Recording is automatically stopped before the
recording time exceeds 10 minutes.
The thumbnails (P.52) of the motion pictures
recorded in WEB mode are displayed with [ ].
The remaining recordable time is counted down on the display from 9 m 58 s,
57 s or 56 s down to 0 while the PRE-REC function (P. 40) setting is on.
When the remaining recordable time falls below 5 seconds while the fade-in/
fade-out function (P.37) setting is on, the fade-in/fade-out function is canceled.
34
LSQT1438
functions used with
1
Set to [
].
2
Press
.
Start recording.
3
[ ] displayed

using the video light

Brightening up dark scenes for recording

The built-in video light can be used when the subject is in dark surroundings.
1
Set to [
] or [ ].
Each time
is pressed, the icon changes as shown below.
Permanently ON
Turns ON or OFF
automatically depending
on the brightness of the
surroundings.
In intelligent auto mode,
the light turns on when
[
] appears.
The light automatically turns off at the following times:
When the mode dial is set to [ ] or [ ]
When a computer is connected to the unit
During quick start standby (P.19)
In demo mode (P.86), the light automatically turns on.
Set the video light to off in locations where the use of a video light is prohibited
or when the auto video light cannot be deactivated under sufficient light
conditions.
2
Press
.
[LIGHT] icon displayed
(No icon displayed)
OFF
LSQT1438
LSQT1438
35
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents