Table of Contents
Advertisement
1
Menus
Others
SETUP menu
Item
RESUME PLAY
Continue playback from the point it was stopped.
Display current information or settings on the LCD monitor.
DISPLAY
•
Even when this item is set to [OFF], the operating status, date
and world time will remain displayed.
DATE/TIME
Select the date and time display mode.
DATE FORMAT
Select the date display format.
FORMAT CARD
Format SD cards.
QUICK START
Start recording instantly.
Turn off the unit if the unit is not being operated.
This function does not work in the following cases.
ECONOMY
•
While using the AC adaptor
•
While connected to a computer or printer via USB
Allow operations such as starting and ending recording to be
signaled by a beep.
When [ON]
Beep:
BEEP SOUND
Beep-Beep: • When recording stops or the unit is turned off
Beep-Beep, Beep-Beep ... (4 times consecutively):
POWER LCD
Adjust the brightness of the LCD monitor.
LCD SET
Adjust brightness or colour density of the LCD monitor.
TV ASPECT
Display images at the aspect ratio of a connected TV.
EXT. DISPLAY
Display information on a connected TV.
Return all settings except for [LANGUAGE] and [CLOCK SET] to
INITIAL SET
their defaults at the time of purchase.
Display an introduction to the unit (demonstration mode).
The demonstration stops when any operation except pressing the
DEMO MODE
[iA] or [MANUAL AF/MF] button is performed, but it will resume if no
operations are performed for approx. 10 or more minutes.
86
LSQT1438
(cont.)
Purpose
• When recording starts or the unit is turned on
• When a computer or printer is recognized
• If an error that prevents recording occurs, etc. Check
the message (P.90) that appears on the LCD monitor.
Recording and playback functions can be used and basic settings made.
(For setting procedures, see P.20.)
●
Settings enclosed in
are active at the time of purchase.
Settings/Notices
OFF / ON
OFF / ON
OFF / D/T / DATE
Y/M/D / M/D/Y / D/M/Y
YES / NO
OFF / ON
OFF /
5 MINUTES : The unit turns off if the unit is not operated
for about 5 minutes. To resume the unit use,
set the mode dial to [OFF] and then the
desired mode position.
OFF / ON
AUTO /
/
/
/
•
[
] is automatically selected when the AC adaptor is
used.
•
[AUTO] is not displayed with the mode dial set to [
[
], or in manual mode, where [
] is the default.
YES / NO
4:3 / 16:9
OFF / ON
When the unit has been turned on with the mode dial set to
[
] or [
], [ON] is set automatically.
YES / NO
OFF : [OFF] is normally set.
ON : When the AC adaptor is connected without an SD
card having been inserted, the demonstration starts,
and it stops when an SD card is inserted.
Mode
Page
54
26
22
22
58
19
―
―
23
] or
23
60
60
―
―
87
LSQT1438
- Quick Links:
- Charging
Hide quick links:
Advertisement
Table of Contents
