Operation
Headset operation
Ending a call on the headset
When the headset base is plugged into the telephone wall jack
(installation option 1 or 2):
•
Press
/OFF on the headset or place the headset in the
ON
headset base.
When the headset base is connected to a multiple line or
digital business corded telephone (installation option 3):
1.
Press
/OFF on the headset or place the headset in the
ON
headset base.
2.
Hang up the corded handset by placing it in the telephone base.
Auto off
A call ends automatically when you put the headset in the
headset base.
Temporary ring tone silencing
Press MUTE/
headset earpiece. This silences the ring tone without disconnecting
the call. The next incoming call rings at the preset volume.
to temporarily silence the ring tone in the
FLASH
31