Table of Contents
Advertisement
Getting started
Battery installation
Install the battery, as shown below. After installing the battery,
you may be able to make and receive short calls. For optimal
performance, charge the headset battery for at least six hours
before use. When fully charged, the headset battery provides
approximately 10 hours of talk time or five days of standby time.
When the headset is not in use, recharge by returning it to the
headset base.
1.
If the battery compartment cover is
attached, press on both sides of the
cover and lift it up and off.
2.
Insert the battery into the battery
compartment with the label
THIS SIDE UP facing up.
3.
Push the battery plug into the
connector inside the compartment
according to the color-coded label.
Place the wires neatly inside
the compartment.
4.
Insert the tab on the bottom of the
battery compartment cover into the
battery compartment.
5.
Press down gently on the battery
compartment cover until it snaps
into place.
NOTE: Remove the ear hook from the headset (see page 24) before
battery replacement.
8
1
2
3
4
Hide quick links:
Advertisement
Table of Contents
