Pc Monitor Mode; Connecting A Pc; Selecting The Channel Position For The Pc; Settings For The Pc - Grundig VISION 2 16-2830 T Manual

SETUP
AUTOCONFIGURATION
HORIZONTAL POS.
VERTICAL POS.
PHASE
CLOCK
8
d
Select
OK MENU
7
32

PC MONITOR MODE

Connecting a PC

1
Connect the socket »PC-IN« on the television to the correspon-
ding socket on the PC using a VGA cable.
2
Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).

Selecting the channel position for the PC

1
Press »AV«, select the »PC« channel with »
»OK« to confirm.

Settings for the PC

1
Press »MENU« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2
Select »SETUP« with »
3
Select the function or setting you want with »
» « or » « to execute it.
– Options:
»AUTOCONFIGURATION« For automatic PC configuration;
»HORIZONTAL POS.«
BACK
»VERTICAL POS.«
»PHASE«
»CLOCK«
4
Press »EXIT« to exit the »SETUP« menu.
----------------------------------------------------------
»PC AUDIO IN« on the television to the
Λ
Λ « or » V « and press »OK« to confirm.
Adjust the picture position horizon-
tally;
Adjust the picture position verti-
cally;
Remove horizontal flicker, blurring
and horizontal lines.
Set the cycle frequency;
V
« or » « and press
Λ V
« or » « and press