Tuning Analogue Television Stations - Grundig VISION 2 16-2830 T Manual

SETUP
SYSTEM BG
CHANNEL S04
FINE TUNE 0
r e
SEARCH
PROGRAM NO P02
STORE
AUTOPROGRAM
8
G G
0 - 9
6 5
d
CHANGE BACK
MENU
7
SETUP
SYSTEM BG
CHANNEL S04
FINE TUNE 0
r e
SEARCH
PROGRAM NO P02
STORE
AUTOPROGRAM
8
6 5
d
SEARCH BACK
MENU
7
SETUP
SYSTEM BG
CHANNEL S04
FINE TUNE 0
r e
SEARCH
PROGRAM NO P02
STORE
AUTOPROGRAM
8
6 5
d
STORE BACK
MENU
7
SPECIAL SETTINGS

Tuning analogue television stations

These settings are only necessary if you can not receive digital
stations. The television channel can be set directly or using the
search.
Switching the television to analogue channels
1
Open the »SOURCE« menu by pressing »AV«.
2
Select the »ANALOG« signal source with »
»OK« to confirm.
Note:
Additional operations are explained in the following sections.
Setting channels using the search
1
Open the »MAIN MENU« menu with »MENU«.
– The »MAIN MENU« appears.
2
Select »SETUP« with »
– The »SETUP« menu appears.
3
Select »PROGRAM NO« with »
channel with » « or » «.
4
Select »SEARCH« with »
» « or » «.
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Note:
The current system is automatically displayed in the »SYSTEM«
line. Select »SYSTEM« with »
incorrect. Select the setting required with » « or » «.
5
Select »STORE« with »
– The »STORED« message appears.
Note:
To set other television stations, repeat steps
6
Press »EXIT« to finish the setting.
------------------------------------------------------------------
Λ
Λ « or » V « and confirm with »OK«.
Λ V
« or » « and set the preset
Λ « or » V « and start the search with
Λ « or » V « if the colour or sound are
Λ V
« or » « and confirm with » «.
3
V
« or » « and press
to 5.
35