Picture Settings; Audio Settings - Grundig VISION 2 16-2830 T Manual

PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
COLOUR TEMP. NORMAL
DNR LOW
CCE ON
BACKLIGHT
8
6 5
d
CHANGE
MENU
7
SOUND
VOLUME
BASS
TREBLE
BALANCE
SOUND TYPE STEREO
SOUND MODE NORMAL
8
6 5
d
CHANGE
MENU
7
16
SETTINGS

Picture settings

1
Press »MENU« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »PICTURE« with »
– The »PICTURE« menu appears.
3
Select »BRIGHTNESS«, »CONTRAST«, »COLOUR«, »SHARP-
NESS«, »COLOUR TEMP.«, »DNR« (noise reduction), CCE (co-
lour and contrast enhancement ensures better saturation of
BACK
colours) or »BACKLIGHT« (backlight of the LCD screen) by pres-
sing »
4
Press » « or » « to select the level.
5
Press »EXIT« to finish the settings.

Audio settings

1
Press »MENU« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »SOUND« with »
– The »SOUND« menu appears.
Volume, Bass, Treble and Balance
1
Select »VOLUME«, »BASS«, »TREBLE« or »BALANCE«, by pres-
sing »
2
Press » « or » « to select the level.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
BACK
original sound on sound channel B (display: »DUAl II«) and the
dubbed version on sound channel A (display: »DUAL I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »STEREO«).
Note:
You can only select the »SOUND TYPE« function on digital and
AV presets.
1
Select »SOUND TYPE« with »
with » « or » «.
----------------------------------------------------------------------------------------------------
Λ « or »
Λ « or » V «.
Λ
« or »
Λ V
« or » «.
V « and confirm with »OK«.
V
« and confirm with »OK«.
Λ « or » V « and adjust the setting